Products : MFS 16 PEDESTAL

System Description

Each pedestal consists of a flat steel base plate 100mm x 100mm x 2.5mm thick. The base plate has four 6mm holes near each corner. The holes are on the diagonal 11mm in fromthe corners. A 25.4mm outside diameter by normally 20mm inside diameter steel tube is friction welded to the centre of the base plate. The head consists of a circular steel plate 89mm outside diameter.The M16 threaded bar is then friction welded to the centre of the disc. The head disc is 2mm thick and has four 5.8mm holes spaced evenly around it on a 65mm PCD, 10mm in from the circumference. The last 6mm outer edge of the circular plate is profiled downwards slightly and the circumference truncated slightly at four points evenly spaced around the circumference. The two components are mechanically by means of a M16 full locking nut.

Loading Capacity

< Back